Backup Logs - Buffalo TeraStation 5010 User Manual

9
Select the backup destination and click OK.
10
Click OK. Jobs added to "Backup List" are displayed.
11
Click Close.

Backup Logs

The following backup error codes may be recorded in the backup log. Read the description and try the respective
corrective actions for the error.
Code Description
The backup destination USB
Code 3
drive could not be found.
The backup destination shared
Code 5
folder could not be found.
The Ethernet cable was
disconnected from the backup
Code 10
source TeraStation when the
backup job started.
The drive capacity of the
Code 11 backup destination TeraStation
became full.
Corrective Action
Verify that the backup destination
USB drive is connected to the
TeraStation properly.
Verify that the Ethernet cable is surely
connected and that the hub or other
devices on the network are turned on.
Reconnect the Ethernet cable.
Delete unnecessary files and folders.
70
Log Example
rsync error: errors
selecting input/
output files, dirs (code
3) at main.c(634)
[Receiver=3.1.0]
Can't write to backup
destination(target
disk is broken?).
rsync error: error
starting client-server
protocol (code 5) at
main.c(1504)
rsync error: error in
socket IO (code 10)
at clientserver.c(128)
[sender=3.1.0pre1]
rsync error: error
in file IO (code 11)
at receiver.c(389)
[receiver=3.1.0]