Buffalo TeraStation 5010 User Manual page 60

4
Click Edit under "Access Control (Target Discovery)".
5
Enable authentication, enter the target CHAP name and secret, and click OK.
Note: To enable mutual authentication in addition to target CHAP name and secret authentication, select the
"Enable mutual authentication" checkbox and enter the initiator CHAP secret.
To search or connect the volume which has mutual authentication enabled from Microsoft iSCSI Initiator,
initiator CHAP secret settings should be configured.
6
Click Close.
Configuring access restrictions for the entire TeraStation is finished.
Connecting Volumes on the Access-Restricted TeraStation
If access restrictions are configured for the entire iSCSI volume, that volume will not be detected by Microsoft iSCSI
Initiator. To connect that volume, the target CHAP name and secret should be authenticated.
59