Entering The Ip Parameters Via Hidiscovery - Hirschmann MACH 4000 User Manual

Entering the IP Parameters
2.3 Entering the IP Parameters
via HiDiscovery
The HiDiscovery protocol enables you to assign IP parameters to the Switch
via the Ethernet.
You can easily configure other parameters via the Web-based interface (see
the "Web-based Interface" reference manual).
Install the HiDiscovery software on your PC. The software is on the CD sup-
plied with the Switch.
To install it, you start the installation program on the CD.
Note: The installation of HiDiscovery involves installing the WinPcap Version
3.0 software package.
If an earlier version of WinPcap is already installed on the PC, then you must
first uninstall it. A newer version remains intact when you install HiDiscovery.
However, this cannot be guaranteed for all future versions of WinPcap. In the
event that the installation of HiDiscovery has overwritten a newer version of
WinPcap, you uninstall WinPcap 3.0 and then re-install the new version.
Start the HiDiscovery program.
Basic - L3P
Release 4.0 11/07

2.3 Entering the IP Parameters via HiDiscovery

11