Description Of Ssh Access - Hirschmann MACH 4000 User Manual

Protection from unauthorized access 6.2 Telnet/Web/SSH access
After the Web server has been switched off, it is no longer possible to login
via a Web browser. The login in the open browser window remains active.
Note: The Command Line Interface and this dialog allow you to reactivate
the Telnet server.

6.2.3 Description of SSH access

The SSH server of the Switch allows you to configure the Switch by using the
Command Line Interface (in-band). You can deactivate the SSH server to
prevent SSH access to the Switch.
On delivery, the server is deactivated.
After the SSH server has been deactivated, you will no longer be able to ac-
cess the Switch via a new SSH connection. If an SSH connection already ex-
ists, it is kept.
Note: The Command Line Interface (out-of-band) and the Security:Tel-
net/Web access dialog in the Web-based interface allow you to reactivate
the SSH server.
Note: To be able to access the Switch via SSH, you require a key that has to
be installed on the Switch (see the "Basic Configuration" user manual).
Basic - L3P
8
Release 4.0 11/07