Dealer Control Center - Lennox iComfort E30 Installation And Setup Manual

Dealer Control Center

This menu provides access to the dealer for performing various functions as listed below:
To navigate back to the dealer control center,
<
touch on the Dave Lennox icon when available
on the top left-hand side of the screen.
<
To navigate back to the previous screen, touch
"Previous Screen
on the left arrow when available.
Name"
Use to make changes to equipment settings and add or remove
24VAC equipment or accessories. In addition the reset all equipment
option is available. This will allow the installer to reset all
system components
Use to display
system notifications
notifications
equipment
equipment and reconfigure.
Figure 16. Dealer Control Center
Use to run test on
diagnostics
tests
dealer
control center
exit
Exit to Home
screen.
22
Use to run
diagnostics on
system components
Use to display
installation results.
Note - Report is not
installation
available until after
report
exiting the dealer
control center following
commissioning.
Return to the dealer
control center from the
home screen to view
the installation report.
information
Use to display
system information