Table of Contents General ............16 Google Home and Assistant ......23 About ..............16 Perfect Temp and Schedule Mode Functions ..23 Features..............3 Dealer Info ............16 Heat / Cool Mode (Auto-Changeover) ....23 Dealer Access ...........16 Additional Help ..........24 Home Screen............3 Screen Lock............17 IFTTT ............24 Temperature Dial Feature .......3 Date &...
• Wi-Fi Connected. • Smart Away - Uses the thermostat to control the home temperature while ® Due to Lennox’ ongoing commitment to quality, features and options are unoccupied (geo-fencing). subject to change without notice and without incurring liability. • FEELS LIKE - Controls the system using outdoor / indoor temperatures and ®...
Page 4
C. This is the location where no system demand will be active. For example, in E. System Status - Left Side of Screen: This area displays various functions figure 1, the system would be off between A and B locations. that are either pending or currently active.
Page 5
Table 1. Home Screen and System Status Icons Table 1. Home Screen and System Status Icons Icon Screen Text Purpose Icon Screen Text Purpose Fan set to circulate. Fan is following schedule and The system is defrosting the outdoor unit coil (only Fan is running cycles during periods of equipment inactivity.
Page 6
Table 1. Home Screen and System Status Icons heat only heat / cool Icon Screen Text Purpose auto cool only emerg heat The system is following an active schedule and is Transitioning to transitioning to the next temperature setting based on next schedule select mode a time indicator.
Page 7
Figure 4. Set Schedule Time Screen setup to use either an external temperature sensor or Accuweather, thermostat has lost connection to the Internet or Lennox server. Schedule IQ Another possibility is you are not logged into your account. Also on This schedule operates in Heat •...
• Consumer Portal (https://www.lennoxicomfort.com). Never use a home guest account. • Lennox iComfort mobile app (on Android or iOS mobile devices). Never use an open router connection (non-secure). Always use a secure connection physically located in the home where the thermostat is located.
7. Press join. • Garage door openers • Neighbor’s wireless devices Whether connecting to a visible or hidden network, if successful, a check mark will appear above both the router and Internet icons. To eliminate a possible source of interference, temporally disable any devices and see if Wi-Fi performance has improved.
Away Smart Away can also be enabled from your mobile device once you have installed the Lennox iComfort Thermostat App and logged in. Go to the menu NOTE: Most of the procedures listed in this section can be accomplished > settings > away and turn ON Smart Away. To allow the mobile device you at the thermostat or using the Lennox iComfort Thermostat App or are on to use this feature, turn ON participate.
values for each mobile device. The thermostat will not show the Smart Away Ventilation indication until all devices have moved past their inner away fence, and the system will not reach the user-set away set points until all devices have moved This option will only appear if a fresh air damper, ERV or HRV is installed and past their outer fence.
NOTE: When set to Perfect Temp, the Heat • Cool position indicator changes. What is ASHRAE? The blue color (cooling) indicator is on the left and heating (red) ASHRAE 62.2 is a national standard that provides methods for achieving indicator is on the right. This is just the opposite on how it is displayed acceptable indoor air quality in typical residences.
• When the outdoor temperature is above the default high balance point of Humidification Control Center 50°F (10°C) (default), only the heat pump will be allowed to run (no auxiliary heat). When a humidification accessory is installed and humidify is enabled, the options are as follows: •...
Page 14
Table 3. Humidity Control Modes of Operations Table 3. Humidity Control Modes of Operations Function Setting Mode Description Function Setting Mode Description Normal These thermostat modes allow the homeowner dehumidification set−point to control the relative humidity (RH) between Dehumidification 15% and 45%. The following conditions must be Only met for either mode to operate: •...
Please visit your enrgy provider websitre to get a registration url, This section is applicable only to iComfort S30 controlled systems that have and the press enroll. You may be asked to provide a registration code. the iHarmony zoning system installed. Works only with Lennox communicating name upstairs enroll energy savings systems.
3. If enrollment is successful, the next screen will indicate enrollment status Advanced Settings as enrolled and connection status as connected. Energy Savings Settings This section is for installers and technicians ONLY to customize system settings and run various diagnostic tests. This screen will allow you to use your energy provider’s default temperature View Dealer Control Center or pricing set points.
NOTE: For weather or screen saver photo (upload) to work, the thermostat has for five seconds. to be connected to the Internet, system registered, and the thermostat is logged into your Lennox account. See menu > system settings > Date & Time account to verify. Screen saver will appear approximately 30 seconds The following items can be set on this screen: after no screen interaction.
9. Clean Screen - Locks the screen and allows user 30 seconds to clean the 6. Check that you agree to the Lennox EULA. Press on LENNOX EULA to screen. During this period, the screen will not respond to any input.
If the setup and connection to the Lennox server is successful, a green check Notifications (Critical, Warnings and Reminders) mark will appear above the server icon under the Wi-Fi menu option. Table 5. Notification Types Generate Pin Notification Color What it means...
PureAir™ S (S30 Only Feature) PureAir Performance PureAir S is an air purification system that works only with the iComfort S30 Ultra Smart Thermostat and cleans the air in your home by addressing all three types of indoor air pollutants an: filter life •...
Zoning (S30 Only Feature)” on page 15. Dual-Fuel Operation Heating / Cooling Changeover NOTE: Only Lennox communicating heat pump outdoor units may be used The following is an example of how the system operates during a heating / with a dual-fuel system.
SYSTEM Amazon Alexa, Google Assistant and IFTTT Integration 80° 80° 80° 80° The most current information provided by Lennox is available on the Lennox iComfort Support Center at: http://www.support.lennoxicomfort.com/help/index.html Zone 1 Zone 2 Zone 3 Zone 4 Apple, the Apple logo, iPhone and iPad are trademarks of Apple Inc.
3. Currently, you can pair only one home that is listed in your Lennox IMPORTANT iComfort Account with Alexa. In the situation where you have multiple homes associated with your iComfort account, you will not have a choice For any of these third party applications to work with your thermostat, the to choose the home for Alexa.
• “Out of the Box Setup Procedure after Thermostat Commissioning” on page Additional Help To learn more, go to either the Lennox consumer help at: • “HomeKit Manual Setup” on page 25. http://www.support.lennoxicomfort.com/help/index.html For more information about Apple Homekit, go to: https://www.apple.com/ios/home...
NOTE: You have 15 minutes to complete the procedure or it will time out at the Out of the Box Setup Procedure during Thermostat Commissioning thermostat and you will receive a WAC Failed message. 1. When the thermostat is first powered up, the Wi-Fi Accessory Configuration 2.
3. The following screen indicates that the thermostat is ready for configuring iOS device to begin WAC. Figure 25. Setup New Device 3. Select the iComfort device to continue. Figure 24. Wi-Fi Configuration 4. Under Accessory Setup, you should see a message indicating the accessory will be set up to join “your local network”.
2. Select Add Accessory. 3. Select either a iComfort E30 or S30. Figure 29. Pairing Successful 6. Your E30 or S30 thermostat has been added to Apple Homekit. You can at this point assigned a location for the thermostat and include in your Figure 27.
Page 28
Auto WAC Mode Reset HomeKit to Factory Reset By default this option is set to ON. If the thermostat has never been connected If your service technician needs to reset your E30 or S30 Thermostat, there is to the home’s wireless access point or a HomeKit Factory Reset was initiated. an option not to erase the Apple HomeKit settings if already configured.
20cm during normal operation. iComfort Thermostat App This app is designed to be used with the Lennox iComfort E30 and S30 Thermostats. The iComfort Thermostat App allows the user to control their HVAC system from anywhere in the world as though they were standing in front of your own thermostat.
Page 30
You must own a Lennox iComfort E30 or S30 thermostat to use this app. The thermostat must also be connected to your home’s Wi-Fi router before the app can control the settings. For more information go to https://www.lennox.com/ products/comfort-controls/thermostats.
Index Heat • Cool 12 Settings 4, 8 Emergency Heat 21 Heating / Cooling Changeover 21 Account 18 Heat-to 6 Home Screen Zone Navigation 21 Advanced Settings 15 Home Screen 3 Away 10 Humidification Control Center 13 Energy Savings 15 Humidify + Dehumidify 13 Adding Home Information 18 Language 17...