Mounting The Antenna - Omron V680-HAM91 User Manual

Section 4
Installation, Connections, and Wiring
Antenna Connector

Mounting the Antenna

1.
Hold the connector part of the Antenna and insert it into the
Antenna port while matching the key on the ID Flag Sensor with
the groove on the connector.
2.
Turn the connector clockwise to lock it in place.
Removing the Antenna
1.
Turn the connector in counterclockwise to release the lock.
2.
Pull the connector straight out of the port.
The connector cannot be removed without turning it to release the lock.
If the cable is pulled without releasing the lock, it may cause the cable or wires to break. Make sure that the lock is
released before pulling out the connector.
RFID System
42
User's Manual
Key
Antenna connector
Key
Antenna connector