Id Flag Sensor - Omron V680-HAM91 User Manual

Section 2
Names and Functions of Components

ID Flag Sensor

RFID System
14
User's Manual
Interface Connector : CN1
Connect to 24VDC power, INHIBIT/TRIG Input and Outputs.
Recommended Power Supply : S8VS-03024(OMRON)
Note. Please use the Interface Cable(Optional).
Interface Connector : CN2
Connect to Inputs.
Note. Please use the optional Interface Cable(Optional).
State Indicator LED
RUN : ID Flag Sensor Status(Green)
T/R : RF Tag communications status(Yellow)
NORMAL/ERROR : IF Flag Sensor operation result(Green/Red)
READ/WRITE : READ or WRITE operation status(Green/Yellow)
VERIFY OK/NG : Verify Read operation result(Green/Red)
Data Display LED
Date Display(Green)
Error Code Display(Red)
Noise Level Display (Green)
Mode Switches
IF Flag Sensor Operation Mode setting switches.
• Access Mode Setting Switch : Set the access mode to the RF Tags.
• Output Mode Setting Switch : Set the output mode and output time.
• Read Mode Setting Switch : Set the read operation mode.
• Write Mode Setting Switch : Set the write operation mode.
Access Address Setting
Set the access address to the RF Tag in hexadecimal notation (0000 hex to
FFFF hex)
Antenna Connector
Connects to V680-series Antennas.