Hdd Fpc - Toshiba PORTEGE M300 Maintenance Manual

4 Replacement Procedures

4.20 HDD FPC

Removing the HDD FPC
To remove the HDD FPC, follow the steps below and refer to figures 4-33.
1. Raise the slider of connector CN1800 by lifting it up toward the arrow direction.
2. Remove the HDD FPC from the system board.
Slider
Installing the HDD FPC
To install the HDD FPC, follow the steps below and refer to figures 4-33.
1. Connect the HDD FPC to the connector CN1800 on the system board.
2. Push down the slider of connector and secure the lock.
CAUTION: To lock the connector by slider, follow the procedures below.
(1). Push down the slider of connector from the top by pressing whole top
surface.
(2). Secure the lock by pushing down the slider completely.
PORTEGE M300 Maintenance Manual (960-504)
CN1800
Figure 4-33 Removing the HDD FPC

4.20 HDD FPC

HDD FPC
4-47