Ricoh Kr-P2 Field Service Manual page 165

This SP must be executed immediately after installation of an HDD unit in a basic machine
that previously had no HDD. The first time the machine is powered on with the new HDD
installed, the system automatically takes the address book from the NVRAM and writes
it onto the new HDD. However, the new address book on the HDD can be accessed only
by the system administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
However, at this point the address book can be accessed by only the system
administrator or key operator.
5. Enter the SP mode and do SP5846 041. After this SP executes successfully, any user
can access the address book.
Addr Book Media
Displays the slot number where an address book data is in.
[0 to 30 / - /1]
043
0: Unconfirmed
1: SD Slot 1
2: SD Slot 2
4: USB Flash ROM
Ini Local AddrB
047
Clears all of the address information from the local address book of a machine managed
with UCS.
Ini LDAP AddrB
049
Push [Execute] to delete all items (this does not include user codes) in the LDAP address
book that is controlled by UCS.
Ini All AddrB
050
Clears everything (including users codes) in the directory information managed by UCS.
However, the accounts and passwords of the system administrators are not deleted.
20: HDD
30: Nothing
SP Tables
3
67