Ricoh Kr-P2 Field Service Manual page 127

1003 1 BypassTray Plain
1003 2 BypassTray Thick
1003 3 BypassTray Thick2
1003 4 MainTray Plain
1003 5 MainTray Thick
1003 6 MainTray Thick2
1003 7 BankTray Plain
1003 8 BankTray Thick
1003 9 BankTray Thick2
1003 10 Duplex
Fusing control
1104
Use phase control if the room lights flicker when the fusing lamp starts.
Defaults: North America – Normal (On/off control), Europe – Phase
Fusing Temp.
1105
Adjusts the fusing temperatures for printing and standby mode.
Plain
1105 1
Adjusts the fusing temperature for printing on normal paper.
Thick2
1105 2
Adjusts the fusing temperature for printing on thick 2 paper.
Standby Temp
1105 3
Adjusts the fusing temperature for standby mode.
1106 Fusing Temp Disp
1106 1 Displays the current fusing temperature.
[–8 to 8 / 0 / 1 mm step]
0: Normal, 1: Phase control
[150 to 200 / 170 / 5 deg.] DFU
[150 to 195 / 185 / 5 deg.] DFU
[140 to 175 / 168 / 1 deg.] DFU
SP Tables
3
29