Ricoh Kr-P2 Field Service Manual page 154

3. Appendix: SP Mode Tables
Instl: Condition
Displays a number that indicates the status of the @Remote service device.
0: Neither the registered device by the embedded RCG nor embedded RCG device is
set.
1: The embedded RCG device is being set. Only Box registration is completed. In this
5816 201
status the external RCG unit cannot answer a polling request.
2: The embedded RCG device is set. In this status the external RCG unit cannot answer
3
a polling request.
3: The registered device by the embedded RCG is being set. In this status the embedded
RCG device cannot be set.
4: The registered module by the embedded RCG has not started.
5816 202 Instl: ID #
5816 203 Instl: Reference
Instl Ref Result
Displays a number that indicates the result of the inquiry executed with SP5816 203.
0: Succeeded
1: Inquiry number error
2: Registration in progress
3: Proxy error (proxy enabled)
5816 204
4: Proxy error (proxy disabled)
5: Proxy error (Illegal user name or password)
6: Communication error
7: Certification update error
8: Other error
9: Inquiry executing
Instl: Ref Section
5816 205
Displays the result of the notification sent to the device from the GW URL in answer to the
inquiry request. Displayed only when the result is registered at the GW URL.
5816 206 Instl: Rgstltn
56
Allows entry of the number of the request needed for the
embedded RCG device.
Executes the inquiry request to the @Remote GateWay
URL.
Executes Embedded RCG Registration.