Ricoh Kr-P2 Field Service Manual page 156

3. Appendix: SP Mode Tables
3
Error Caused by
Response from GW
URL
5816 209 Instl Clear
5816 250 Print Comm Log
5821 NRS Address
58
@Remote communication is prohibited. The
-12005 device has an Embedded RC gate-related
problem.
A confirmation request was made after the
-12006
confirmation had been already completed.
The request number used at registration was
-12007
different from the one used at confirmation.
Update certification failed because
-12008
mainframe was in use.
Attempted dial up overseas without the
-2385 correct international prefix for the telephone
number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for External RCG is illegal
-2396 Device ID for External RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its embedded RCG setup.
Prints the communication log.