Table of Contents
Advertisement
3. Appendix: SP Mode Tables
1001 1 BypassTray Plain
1001 2 BypassTray Thick
1001 3 BypassTray Thick2
1001 4 MainTray Plain
1001 5 MainTray Thick
1001 6 MainTray Thick2
3
1001 7 BankTray Plain
1001 8 BankTray Thick
1001 9 BankTray Thick2
1001 10 Duplex
Side to Side Reg
Adjusts the printing side-to-side registration from the 1st paper feed station using the
1002
trimming area pattern (SP2-902 No.12).
Push [ ] or [ ] to select the settings (plus or minus).
Specification: 0 ±2.0 mm.
1002 1 BypassTray
1002 2 MainTray1
1002 3 MainTray2
1002 4 BankTray1
1002 5 BankTray2
1002 6 Duplex
Regist sag
1003
Adjusts the relay clutch timing at registration. Relay clutch timing determines the amount
of paper buckle at registration. (A "+" setting causes more buckling.)
28
[-40 to +40 / 0 / 1 mm]
[-40 to +40 / 0 / 1 mm]
Advertisement
Table of Contents
Troubleshooting
