Ricoh Kr-P2 Field Service Manual page 146

3. Appendix: SP Mode Tables
5803 37 Bank2 PaperSize
5803 38 Duplex Cover
5803 39 Duplex Unit Set
5803 40 Dplx Ent Sensor
3
5803 41 Dplx Exit Sensor
5803 42 Dplx Turn Sensor
Output check
5804
Turns on electrical components individually for test purposes.
NOTE: SP Modes other than those listed in this table, are not used in the machine.
5804 1 Main Motor: L
5804 2 Main Motor: H
5804 3 Middle Clutch
5804 4 Tray1 Clutch
5804 5 Tray2 Clutch
5804 6 Regist Clutch
5804 7 Bypass Solenoid
5804 8 Fan High
5804 9 LD1 Compulsion
5804 10 LD2 Compulsion
5804 11 LD1+2 Compulsion
5804 12 Polygon Motor: L
5804 13 Polygon Motor: H
5804 16 Fuser Fuse Cut
48
Same as SP5803-33
0: Close, 1: Open
0: Not set, 1: Set
Duplex entrance sensor;
0: Paper not detected, 1: Paper detected
Duplex exit sensor;
0: Paper not detected, 1: Paper detected
Duplex inverter sensor;
0: Paper not detected, 1: Paper detected