Setting Up Your Rower - BodyCraft VR400-RW45 Owner's Manual

SETTING UP YOUR ROWER

Unfolding
Warning : To avoid serious injury, keep
fingers/hands/feet away from the fold-
ing hinge when unfolding and folding
the Rower.
1. Step on the PIVOT LOCK BAR HANDLE with
one hand supporting the ALUMINUM BEAM.
2. Slightly put the ALUMINUM BEAM down on
the ground.
3. Lift up the ALUMINUM BEAM by pulling up the
PIVOT HANDLE until "CLICK" sound is heard.
4. Ensure the PIVOT LOCK BAR HANDLE at the
correct position.
IMPORTANT: Clear a workout area 1 x 2.5 Meters before setting-up your Air Magnetic Rower. Ensure the floor is solid and level.
Folding
1. Hold the PIVOT HANDLE with right hand and
raise up the ALUMINUM BEAM.
2. Push down the PIVOT LOCK BAR HANDLE
with left hand to release the folding hinge and
slowly let the TRANSPORTION WHEELS reach
the ground.
3. Pull the ALUMINUM BEAM up to the folding
position until "CLICK" sound is heard.
4. Ensure the PIVOT LOCK BAR HANDLE at the
correct position.
Transportation
Your Rower has transportation wheels located at
the middle. This enables you easily move the
Rower from room to room.
Do not attempt to transport the Rower without
the PIVOT LOCK BAR firmly engaged.
7