BodyCraft V2 Instruction Manual

Bodycraft leg press instruction manual

Hide thumbs Also See for V2:

As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or

find missing or damaged parts, we will guarantee your complete satisfaction through our authorized

dealer service centers or our home office customer service department. Please call your local dealer for

assistance or RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained techanicians will provide immediate

assistance to you, free of charge.

We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is

guranteed for as long as you own it. We will repair or replace anything that goes wrong.

4109LP

INSTRUCTION MANUAL

LEG PRESS (V2)

OPTION OF K1 (V2)

QUESTION?

Bodycraft is a division of Recreation Supply Inc.

P. O. Box 181

Sunbury, OH 43074

Table of Contents

Need help?

Do you have a question about the V2 and is the answer not in the manual?

Page 1 RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained techanicians will provide immediate assistance to you, free of charge. We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is guranteed for as long as you own it. We will repair or replace anything that goes wrong.
Page 2 Eyelet end Pull out the selector pin at weight stack of K1 gym to allow top cable movable. 1. Attach the eyelet end of the Leg Press Cable (243) to the Leg Extension Arm (17), using one 3/8" X 3" Hex Bolt (113) and one 3/8" Nylon Nut (138) as shown in Fig.1. 2.
Page 3 Eyelet end FIG 1 FIG 6 FIG 5 FIG 9,11 FIG 9 FIG 12 STEP 2 FIG12 FIG10 FIG 12 FIG 8 245 246 STEP 3 LEG PRESS CABLE (243) FIG 2 FIG 7 STEP 1 FIG 1 FIG 9 FIG 2 FIG11 FIG 7...