BodyCraft VR400-RW45 Owner's Manual page 18

VR400 ROWER ASSEMBLY INSTRUCTIONS
STEP 7
a) Remove 4 x BOLT [319] from SEAT [119] with the tool
provided.
b) Assemble the SEAT [119] and the SEAT CARRIAGE [009]
with 4 X BOLT [319] .
c) Cut and Remove the ALUMINUM BEAM [001] CABLE TIE
001
009
319 119
STEP 8
a) Remove 4 x BOLT [304] from SEAT CARRIAGE [009]
with the tool provided.
b) Assemble the CARRIAGE COVER [117] and the SEAT
CARRIAGE [009] with 4 X BOLT [304] .
117
304
009
STEP 9
a) Assemble the FOOT PEDAL [013] and the ALUMINUM
BEAM [001] with 4 X BOLT [367] .Tighten 4 x BOLT [367] and
6 x BOLT [319] you left loose from STEP 5 at this time.
001
013
367
319
367
STEP 10
a) Remove 2 x SCREW [508] and BATTERY COVER [153]
from [005] .
STABILIZER - FRONT
b) Install 3 AA Batteries as shown [143A].
c) Reinstall the BATTERY COVER [153] to the
FRONT [005] with 2 X SCREW [508] .
153
143A
002
STABILIZER -
508
005
17