Display Panel; Iso/Dx Indicator; Exposure Counter/Film Speed - Contax AX Instruction Manual

<Display Panel>
(The illustration shows all information available in the display panel
for reference. lt does not represent an actual example of display.)
O Multiple Exposure Mark
Displays when the camera is in the multiple exposure
mode.
@EX Mark
When DX film is loaded in the camera, this mark will be
displayed together with the number of exposures that
can be taken with it.
OISO/DX lndicator
When the displaying the film speed or in the film speed
setting mode, this indicator will be displayed.
o When auto set mode with DX code, always "DX" is
displayed.
@ Exposure Gounter/Film Speed
This mark shows the "number of exposures". When the
"UP" button or "DOWN" button is pressed, it will
switch to show the "film speed".
When DX film is loaded in the camera, it will show the
"film speed" that the camera has read with the DX
code as well as the "number of exposures".
In addition, it has the following functions:
o Display of the remaining time while the self-timer is
operating.
o Display of the time (sec.) that has etapsed on bulb
exposure.
r Display of the operation order in the A. B. C. mode.
o Display of the multiple exposure settings.
o Display of set condition for custom functions.
o Display of the end of the film.
Oritm Mark
This mark is displayed when there is film in the camera.
@Battery Warning Mark
Indicates the time to replace the battery.
<L
Zut
den
nicl
O r
2
g
@ e
E
s
A
FFE
38