Rewinding The Film - Contax AX Instruction Manual

u
tF
After the last frame is exposed, the camera will stop
winding the film and the upper and lower digits of the
exposure counter in the display panel will start to blink
alternately
1
With the mdin switch on, turn the film rewind lever in
^
the direction of the arrow while pressing in the rewind
lock release button, The film will start to rewind itself.
While the film is rewinding, the counter decreases as the
rewinding goes. As soon as rewinding is completed, the
motor will stop and the counter will return to "00".
o lf the rewinding operation has started, be sure to
remove your finger from the rewind lever. The rewind
lever will automatically return to its original position.
DX
tF
)
After making sure the motor has stopped and the
zr gxpggure counter has returned to "00," open the
camera back and unload the film in subdued light.
I To rewind the film in the middle of a roll, follow the
foregoing steps 1 and 2.
o Be sure to unload the film after it has been rewound.
After the film has been rewound, the camera will not
operate unless the camera back is once opened.
68