When Dx Is Selected - Contax AX Instruction Manual

f-l I
, J l
DX
Q Set the exposure mode selector lever to exposure
r-l mode. This completes the film speed setting. The
display panel indicates the exposure counter.
o Once set, the film speed is kept in memory until it reset
to another value.
o You cannot take pictures if the exoosure mode
selector lever is set to "lSO" or "CF".
<When "DX" is Selected>
When "DX" is selected and using the film with DX code,
the camera is set the film speed automatically.
The film with DX code is available in the range of ISO
25 to 5000.
The "DX" mark and the film soeed are indicated on the
outer case of the film cassette.
r When the film with non-DX code is loaded, the film
speed is automaticallv set to ISO '100.
54