Start the D400 configuration utility
134
To start the D400 configuration utility:
1.
At the
command prompt, type d400cfg.
D400#>>
2.
Press the Enter key.
Result: The
D400 Configuration Utility Menu
3.
Type a function number.
The Configuration Utility menu items (see Figure 59) are described in the following
sections:
–
1. Configure Authorization; see page 136
–
2. Configure Network Settings; see page 136
–
3. Configure Network Interfaces; see page 137
–
4. Configure Secure Access; see page 140
–
5. Configure Firewall; see page 143
–
6. Configure Host Names; see page 145
–
7. Configure Time & Time Sync; see page 146
–
8. Reset System Logs; see page 146
–
9. Reset mSQL Database Tables; see page 147
–
10. Reset NVRAM; see page 147
–
11. Rest File Persistence Data; see page 148
–
12. Local HMI; see page 148
–
13. Configure Sync Manager; see page 151
–
14. Redundancy; see page 154
–
15. Power Supply; see page 156
–
16. ARRM; see page 156
–
17. Suppress Forced Qualities To Masters; see page 157
–
18. Restore Factory Default; see page 157
–
19. Reboot D400
4.
Press the Enter key.
Result: A sub-menu for the selected function appears.
GE INFORMATION
CHAPTER 12: USING THE D400 LOCAL CONFIGURATION UTILITY
D400 SUBSTATION GATEWAY INSTRUCTION MANUAL
appears.