Product Specifications - GE Multilin D400 Instruction Manual

Product specifications

System
Communications
24
The D400 adheres to the following product specifications:
• System
• Communications
• Electrical
• Physical
• Environmental
• Software
Additional Standards and Protection are listed in Appendix A, Standards & Protection.
Processor 1.6 GHz Embedded CPU
1.0 GHz Embedded CPU (obsolete)
650 MHz Embedded CPU (obsolete)
Memory 512 MB of PC133 SDR RAM or 1.0 GB of PC133 DDR RAM
16 MB NVRAM standard for persistent event storage
Storage No hard drive
1 GB of Main and 1 GB of User CompactFlash card ship standard
Both expandable to 16 GB, depending on available capacity of industrial
CompactFlash cards
Operating system Linux
Embedded Mini SQL Archive of SOE reports, alarm records, operator notes, HMI quality changes,
database PRFs, and point tags
LED indicators Main module
System status: Power, Ready, IRIG-B and Network port status
Serial port status: Transmit and Receive status per port
Power Supplies
Power on (Green)
Network connections Single or optional redundant Ethernet interface
Fiber Optic and/or Twisted Pair
10/100BaseT (Isolated RJ-45 connector)
100BaseFX (Fiber Optic: 1300 nm, 50/125 µm, 62.5/125 µm multi-mode
duplex fiber cable-ST connectors)
10BaseFL (Fiber Optic: 820 to 850 nm, 50/125 µm, 62.5/125 µm, 100/140
µm, and 200 µm HCS (hard clad silica) multimode duplex fiber cable-ST
connectors)
Data rate: 10 MBps and 100 Mbps
Serial 16 channels: RS-232/RS-485/Fiber optic
communications
Data rate: 300 to 115.2 Kbps
RS-232
Configurable for DCE/DTE operation
Galvanic isolation
Can drive IRIG-B signal to RS-232 ports (with optional IRIG-B Input card)
RS-485
2-Wire/4-Wire support
Galvanic isolation
Fiber Optic
Glass Optical Fiber serial port: (820 to 850 nm) 50/125 µm, 62.5/125 µm,
100/140 µm and 200 µm HCS multi-mode fiber with ST connectors
Plastic Optical Fiber (POF) serial port: (660 nm), 1 mm core with Agilent
Versatile Link Simplex connectors. POF is limited to a maximum of 38.4 kbps.
Configurable ambient state (ON/OFF)
GE INFORMATION
CHAPTER 1: BEFORE YOU START
D400 SUBSTATION GATEWAY INSTRUCTION MANUAL