Diagnostics and System Data
11.4 Diagnostics and System Data
Diagnostics allow you to find the root cause of a an issue or a breakdown that may
occur during the life of your Mailing System.
The system performs tests automatically to diagnose the problem and generate cor-
responding reports.
The System Data gives data about the status of the system and the events or errors
that have occurred.
Diagnostics
As Supervisor, you can gain access to all the diagnostic data listed below:
No.
1
2
11
3
4
5
6
7
8
9
186
Diagnostic
Ping Server
Sensors Status
Display
Keypad
USB ports
Serial Connection
Modem Self Test
Ping Tool
IP Configuration
Checker
Comments
Sends a message to a server (if con-
nected) to check the line.
Reports the status ([0] or [1]) of the sen-
sors below:
Top doc
•
Start print
•
Cover
•
Carriage
•
Top Seal
•
The screen displays, successively, a
black bar without text, then a text.
Displays "Key ok" if the test is correct
Checks the two USB ports (need USB
keys).
Checks the serial port.
Checks the Modem.
Checks Lan address.
Checks Lan connection.