Preparations; General; Understanding The System; Accessories - Neopost IM-75 User Manual

2.

PREPARATIONS

Connect the power cable supplied to the
power socket on the back of the machine
and plug it into an earthed mains power
socket.
The ventilation on the back of the
machine must be assured.
If the machine is shut down in an
emergency, disconnect the power
cable from the socket in the
machine.
3.

GENERAL

3.1 Understanding the
system
The system is an incoming mail
processing solution, designed to open
envelopes along two sides. In the
extraction station the sides of the
envelopes are pulled apart and shaped
and positioned for easy extraction of the
contents. The machine handles envelopes
of varying formats and thickness. The
machine is suitable for installation in
offices, postal departments or similar
environments.
3.2

Accessories

The following accessories are separately
delivered with the system:
• Mains lead.
• Wastepaper basket.
• Plastic box, contents:
- fuse (spare fuse for power inlet),
- screwdriver (to adjust sensor position,
see "Sensor" on page 12)
- a pair of tweezers (to remove paper
residue in the slitting units)
- 3 spare suction cups (brown) for both
arms at the removal area
- 1 spare suction cup (red) for the arm
at the envelope feeder
- 3 spare filters (see "Replace filters" on
page 16)
3.3

Operating controls

3.3.1 General
A : Extendable supports
B : Separator frame
C : Separators
D: Suction arm
E : Receiving bin: collects any paperclips
or money from the envelopes
F : Power switch
G: Display
H : Control buttons
I : Eccentric
J : Electronic Document Detector
(optional)
K : Stapler (optional)
L : Envelope feed hopper
M: Adjustable side guides
N : Suction air regulation
O: Mains lead
P : Slitting unit (1)
Q: Slitting unit (2)
R : Removal area (sensor controlled)
S : Cancel button: cancels the EDD
setting. This button has the same
function as button N on the control
panel (see "Control panel" on page 9).
Not available if the optional transfer
station is mounted.
T : Waiting station
7