Clearing Sel Logs; Example Ipmc Log Output - Fortinet FortiGate-5060 Chassis Manual

Using the shelf manager CLI

Clearing SEL logs

Example IPMC log output

FortiGate-5060 Chassis Guide
01-400-129494-20110912
http://docs.fortinet.com/ • Feedback
Reviewing the SEL messages from the IPMC, FRU and Sensor commands will show you
exactly what devices are in your chassis, what the FRU IDs are for the devices that
connect to them, and all the sensor numbers that each of these devices contain. You
should be able to no identify the vast majority of both good and bad events that have
happened to your chassis and blades.
For more advanced users you can try using "–v" after many of the Shelf Manager
commands or running the "Sensordata", "Threshold", and "Fruinfo" commands to get more
detailed information on each sensor and FRU device.
Use the following command to clear SEL logs:
# clia sel clear
# clia IPMC
Pigeon Point Shelf Manager Command Line Interpreter
10: Entity: (0xf0, 0x60) Maximum FRU device ID: 0x08
PICMG Version 2.2
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change (0x0)
20: Entity: (0xf0, 0x1) Maximum FRU device ID: 0x10
PICMG Version 2.2
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change (0x0)
82: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M4
(Active), Last State Change Cause: Unknown (0xf)
84: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M4
(Active), Last State Change Cause: Unknown (0xf)
86: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M4
(Active), Last State Change Cause: Unknown (0xf)
88: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M4
(Active), Last State Change Cause: Unknown (0xf)
8a: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M6
(Deactivation In Progress), Last State Change Cause: Unknown
(0xf)
8c: Entity: (0xa0, 0x60) Maximum FRU device ID: 0x00
Hot Swap State: M7 (Communication Lost), Previous: M4
(Active), Last State Change Cause: Unknown (0xf)
Using the chassis system event log (SEL)
67