Table of Contents
Advertisement
Using the shelf manager CLI
Displaying specific parameters for a channel
getthreshold/threshold
FortiGate-5060 Chassis Guide
01-400-129494-20110912
http://docs.fortinet.com/
•
Feedback
Enter the following command to display the IP address associated with channel 1:
# clia getlanconfig 1 ip
Pigeon Point Shelf Manager Command Line Interpreter
IP Address: 192.168.0.2
The following command also displays the IP address associated with channel 1:
# clia getlanconfig 1 3
Pigeon Point Shelf Manager Command Line Interpreter
IP Address: 192.168.0.2
The following command displays the subnet mask associated with channel 1:
# clia getlanconfig 1 subnet_mask
Pigeon Point Shelf Manager Command Line Interpreter
Subnet Mask: 255.255.255.0
The following command also displays the subnet mask associated with channel 1:
# clia getlanconfig 1 6
Pigeon Point Shelf Manager Command Line Interpreter
Subnet Mask: 255.255.255.0
The following command displays the default gateway IP address associated with channel
1:
# clia getlanconfig 1 dft_gw_ip
Pigeon Point Shelf Manager Command Line Interpreter
Default Gateway Address: 192.168.0.1
The following command also displays the default gateway IP address associated with
channel 1:
# clia getlanconfig 1 12
Pigeon Point Shelf Manager Command Line Interpreter
Default Gateway Address: 192.168.0.1
clia getthreshold [<IPMB-address> [<sensor-name> |
[<lun>:]<sensor-number>]]
clia threshold [<IPMB-address> [<sensor-name> | [<lun>:]<sensor-
number>]]
This command displays the current threshold values for the supported thresholds of the
specified sensor(s). The sensor must be a threshold-based sensor. Both raw and
processed values are displayed. The following attributes for each sensor are also
displayed:
•
IPMB address of the owning IPM controller
•
Sensor number, sensor name and the LUN by which the sensor can be accessed
•
The Sensor type and Event/reading type code
getthreshold/threshold
41
Advertisement
Table of Contents
