Table of Contents
Advertisement
fruinfo
Display information for a specific FRU
fruinfo
38
Device ID String: "PEM_A"
20: FRU # 6
Entity: (0x15, 0x61)
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change
(0x0)
Device ID String: "PEM_B"
20: FRU # 7
Entity: (0xf3, 0x60)
Hot Swap State: M4 (Active), Previous: M3 (Activation In
Process), Last State Change Cause: Normal State Change
(0x0)
Device ID String: "SAP Board"
For information about hot swap states, see
Enter this command with an IPMB address that refers to a physical slot to display
information similar to that displayed by the clia board command (see
page
35). For example, to display information about the board in physical slot 4 (logical
slot 4, IPMB address 88) enter:
# clia fru 88
Pigeon Point Shelf Manager Command Line Interpreter
88: FRU # 0
Entity: (0xa0, 0x60)
Hot Swap State: M4 (Active), Previous: M4 (Active), Last State
Change Cause: Normal State Change (0x0)
Device ID String: "FG5005A"
clia fruinfo [-v] [-x]<addr> <fru_id>
This command displays FRU Information in a user-friendly format.
For example to display FRU information for fan tray 0:
# clia fruinfo -v 20 2 3
Pigeon Point Shelf Manager Command Line Interpreter
20: FRU # 3, FRU Info
Common Header:
Internal Use Area:
Version = 1
Board Info Area:
Version
Language Code
"board" on page
Format Version = 1
= 1
= 25
Using the shelf manager CLI
35.
"board" on
FortiGate-5060 Chassis Guide
01-400-129494-20110912
http://docs.fortinet.com/
•
Feedback
Advertisement
Table of Contents
