Table of Contents
Advertisement
version
Changing a user account password
version
Generating SNMP traps for system events
58
Use the following command syntax to change a user account password:
clia user passwd <user_id> <new_password>
Where <user_id> is the user account ID and <new_password> is the new password.
For example, enter the following command to change the user name of user account 6 to
NEW-password:
clia user password 6 NEW-password
clia version
This command displays version information for the Shelf Manager software.
# clia version
Pigeon Point Shelf Manager Command Line Interpreter
Pigeon Point Shelf Manager ver. 2.6.4.4
Pigeon Point and the stylized lighthouse logo are trademarks of
Pigeon Point Systems
Copyright (c) 2002-2009 Pigeon Point Systems
All rights reserved
Build date/time: Dec 14 2009 10:09:35
Carrier: HPDL/ACB
Carrier subtype : 0; subversion: 0
Cooling Management Library: libcooling_acb.so; Version: 2.6.4.4
Carrier Product ID: 21990047
#
This section describes how to configure the shelf manager to send SNMP traps when a
component of a chassis or a board in a chassis fails or encounters a problem (for
example, a temperature sensor exceeds its range). This section describes how to
configure the shelf manager to send traps when a chassis FRU changes its FRU state.
FRU state changes are listed in
This section describes how to configure a FortiGate-5000 series chassis shelf manager to
send SNMP traps to an SNMP manager. The shelf manger IP address is 172.20.120.150
and the SNMP manager IP address is 172.20.120.11. The SNMP manager does not
require MIBs or any special configuration to receive traps from the shelf manager.
Table 10 on page
36.
Using the shelf manager CLI
FortiGate-5060 Chassis Guide
01-400-129494-20110912
http://docs.fortinet.com/
•
Feedback
Advertisement
Table of Contents
