Fortinet FortiGate FortiGate-5140 User Manual
  1. Manuals
  2. Brands
  3. Fortinet Manuals
  4. Chassis
  5. FortiGate FortiGate-5140
  6. User manual
Fortinet FortiGate FortiGate-5140 User Manual

Fortinet FortiGate FortiGate-5140 User Manual

Fortinet fortigate fortigate-5140: user guide
Hide thumbs Also See for FortiGate FortiGate-5140:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual, Quick Manual
A detailed guide to the features and capabilities FortiGate-5140 chassis. This FortiGate-5140 Chassis Guide
describes FortiGate-5140 hardware features, and how to install the FortiGate-5140 chassis.
The most recent versions of this and all FortiGate-5000 series documents are available from the
page of the
Fortinet Technical Documentation
Visit
http://support.fortinet.com
FortiGate-5140 Chassis Guide
01-30000-0396-20070201
13
11
9
7
5
3
FILTER
0
FA N TRAY
1
web site (http://docs.forticare.com).
to register your FortiGate-5140 chassis. By registering you can receive product
updates, technical support, and FortiGuard services.
www.fortinet.com
C h a s s i s G u i d e
FortiGate-5140
5140SAP
SERIAL 1
SERIAL 2
ALARM
5140
1
2
4
6
8
10
12
MANAGEMENT
MANAGEMENT
E
E
T
T
H
H
O
O
SYSTEM
SYSTEM
CONSOLE
CONSOLE
R
R
S
S
2
2
3
3
2
2
Z
Z
R
R
E
E
0
0
Z
Z
R
R
E
E
1
1
Z
Z
R
R
E
E
2
2
E2
E1
E2
E1
14
15
14
15
12
13
12
13
10
11
10
11
8
9
8
9
6
7
6
7
4
5
4
5
2
3
2
3
0
1
0
1
ZRE
ZRE
CLK
OK
CLK
OK
EXT
INT
EXT
INT
FLT
FLT
FLT
FLT
HOT SWAP
HOT SWAP
RESET
RESET
LED MODE
LED MODE
FA N TR AY
2
FA N TR AY
14
ETH0 ETH1
ETH0
Service
RESET
STATUS
Hot Swap
1 2
ETH0 ETH1
ETH0
Service
RESET
STATUS
Hot Swap
FortiGate-5000

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FortiGate FortiGate-5140 and is the answer not in the manual?

Questions and answers

Related Manuals for Fortinet FortiGate FortiGate-5140

Summary of Contents for Fortinet FortiGate FortiGate-5140

  • Page 1 FortiGate-5140 hardware features, and how to install the FortiGate-5140 chassis. The most recent versions of this and all FortiGate-5000 series documents are available from the page of the Fortinet Technical Documentation Visit http://support.fortinet.com updates, technical support, and FortiGuard services.

  • Page 2: Warnings And Cautions

    Some FortiGate-5000 series components may overload your supply circuit and impact your overcurrent protection and supply wiring. Refer to nameplate ratings to address this concern. • Make sure all FortiGate-5000 series components have reliable grounding. Fortinet recommends direct connections to the branch circuit. •...

  • Page 3: Table Of Contents

    Use FortiSwitch-5003 modules for base backplane communication ... 28 For more information... 29 Fortinet documentation... 29 Fortinet Tools and Documentation CD ... 29 Fortinet Knowledge Center ... 29 Comments on Fortinet technical documentation ... 29 Customer service and technical support ... 29 Register your Fortinet product...
  • Page 4 Contents FortiGate-5140 Chassis Guide 01-30000-0396-20070201...

  • Page 5: Fortigate-5140 Chassis

    FortiGate-5140 chassis FortiGate-5140 chassis You can install up to 14 FortiGate-5000 series modules in the 14 front panel slots of the FortiGate-5140 ATCA chassis. The FortiGate-5140 is a 12U chassis that contains two redundant hot swappable DC power entry modules that connect to -48 VDC Data Center DC power.

  • Page 6: Fortigate-5140 Chassis Front Panel

    FortiGate-5140 chassis front panel FortiGate-5140 chassis front panel Figure 1 shows the front panel of a FortiGate-5140 chassis. Two FortiSwitch-5003 modules are installed in slots 1 and 2. Six FortiGate-5001SX modules are installed in slots 3, 5, 7, 9, 11, and 13 and six FortiGate-5001FA2 modules are installed in slots 4, 6, 8, 10, 12, and 14.

  • Page 7: Fortigate-5140 Chassis Back Panel

    Figure 2 on page 7 panel includes two hot-swappable redundant -48V/-60 VDC power entry modules (PEMs) labelled A and B. Fortinet ships the FortiGate-5140 chassis with PEM A and B installed. The PEMs provide redundant DC power connections for the FortiGate-5140 chassis and distribute DC power to the chassis slots and to the fan trays.

  • Page 8: Physical Description Of The Fortigate-5140 Chassis

    Physical description of the FortiGate-5140 chassis Physical description of the FortiGate-5140 chassis If you require redundant power you should connect both PEMs to DC power. If redundant power is not required, you should connect PEM A to DC power. Each PEM has four -48V/-60 VDC connectors and 4 RTN connections.

  • Page 9: Fortigate-5140 Shelf Alarm Panel

    FortiGate-5140 chassis FortiGate-5140 shelf alarm panel The FortiGate-5140 shelf alarm panel (SAP), located at the top of the FortiGate-5140 front panel, provides LED indicators of FortiGate-5140 alarms, a telco alarm connector, an alarm LED reset button, and console access to the FortiGate-5140 shelf managers.

  • Page 10: Shelf Alarm Panel Telco Alarms

    8 data bits, and 1 stop bit. The external dry relay Telco alarm interface (48VDC) provides Telco form-c relay connections for minor, major and critical power faults. The cable required to connect to the alarm interface is not supplied by Fortinet. Description MinorReset+ MinorReset- MajorReset+ MajorReset-...

  • Page 11: Fortigate-5140 Shelf Managers

    FortiGate-5140 chassis Table 4: Telco alarm connector pin assignment (Continued) Shield FortiGate-5140 shelf managers The FortiGate-5140 chassis includes two identical redundant hot-swappable shelf managers, located in the dedicated shelf manager slots on the right of the FortiGate-5140 front panel. The primary shelf manager is installed above the secondary shelf manager.

  • Page 12: Shelf Manager Fan And Power Control

    FortiGate-5140 shelf managers Shelf Manager fan and power control Figure 5: FortiGate-5140 shelf manager front panel Reset Hot Swap ETH 0 and 1 network activity LEDs Button 5000SM 10/100 link/Act 10/100 link/Act Mounting ETH0 Status Extraction Knot 100base-T LEDs lever Ethernet Table 5 lists and describes the FortiGate-5140 shelf manager LEDs.

  • Page 13: Air Filter

    FortiGate-5140 chassis Air filter The FortiGate-5140 chassis includes a front accessible air filter. This filter must be in place for the FortiGate-5140 chassis to operate normally. If the air filter is not locked into place this is detected by an air filter presence switch. Air filters should be inspected regularly and cleaned if dirty or replaced if damaged.
  • Page 14 Cooling fan trays FortiGate-5140 chassis FortiGate-5140 Chassis Guide 01-30000-0396-20070201...

  • Page 15: Power Connection And Configuration

    About data center DC power The FortiGate-5140 chassis is designed to be installed in a data center or similar location that has available -48VDC power (also called battery power). Fortinet expects that most FortiGate-5140 customers will be installing their FortiGate...

  • Page 16: Connecting A Fortigate-5140 Pem To Data Center Dc Power

    Connecting a FortiGate-5140 chassis to data center DC power and data center ground Connecting a FortiGate-5140 PEM to data center DC power If you are connecting both PEMs the -48VDC and RTN terminals on PEM A and PEM B must be wired symmetrically. This means that the connections must be the same to both PEMs.

  • Page 17: Connecting The Fortigate-5140 Chassis To Data Center Ground

    Power connection and configuration To connect a FortiGate-5140 PEM to data center DC power Attach the ESD wrist strap to your wrist and to an ESD socket or to a bare metal surface on the chassis or frame. Loosen the screws and remove the terminal block cover from the FortiGate-5140 PEM.

  • Page 18: Connecting The Fortigate-5140 Chassis To Ac Power Using The Fortigate-5053 Power Converter Tray

    Connecting the FortiGate-5140 chassis to AC power using the FortiGate-5053 power converter tray Power connection and configuration Connecting the FortiGate-5140 chassis to AC power using the FortiGate-5053 power converter tray Figure 8: Connecting a FortiGate-5140 chassis to data center ground Chassis FortiGate-5140 ground...

  • Page 19: Fortigate-5053 Power Converter Tray Front And Back Panel

    Power connection and configuration Connecting the FortiGate-5140 chassis to AC power using the FortiGate-5053 power converter tray FortiGate-5053 power converter tray front and back panel The front panel of the FortiGate-5053 power converter tray (shown in provides access to the FortiGate-5140 power supplies. Figure 9: Front panel of the FortiGate-5053 power converter tray with one power The back panel of the FortiGate-5053 (shown in power connector terminal consisting of a RTN connector and a -48VDC...

  • Page 20: Selecting The Power Supplies And Power Convertor Trays That You Need For Your Fortigate-5140 Configuration

    FortiGate-5140 chassis. This section provides guidelines only. Actual requirements may vary depending on your installation requirements. Contact Fortinet Technical Support if you need more information. The FortiGate-5053 power converter tray contains space for up to three FortiGate-5140 power supplies.
  • Page 21 Power connection and configuration Connecting the FortiGate-5140 chassis to AC power using the FortiGate-5053 power converter tray Figure 11: Non-redundant power for all FortiGate-5140 chassis slots Slot 3 Redundant FortiGate-5140 power supplies You can supply redundant power to a FortiGate-5140 chassis by adding a third FortiGate-5140 power supply to the FortiGate-5053 power converter tray (see Figure...
  • Page 22 Connecting the FortiGate-5140 chassis to AC power using the FortiGate-5053 power converter tray Power connection and configuration You can supply redundant power to the entire FortiGate-5140 chassis by adding a second FortiGate-5053 power converter containing two or three FortiGate-5140 power supplies and connected this FortiGate-5053 power converter tray to the second FortiGate-5140 PEM.

  • Page 23: Connecting A Fortigate-5140 Chassis To The Fortigate-5053 Power Converter Tray

    Power connection and configuration Connecting the FortiGate-5140 chassis to AC power using the FortiGate-5053 power converter tray Connecting a FortiGate-5140 chassis to the FortiGate-5053 power converter tray To use a FortiGate-5053 power converter tray with the FortiGate-5140 chassis you need to make DC power connections between the FortiGate-5140 chassis and the FortiGate-5053 power converter tray.
  • Page 24 Connecting the FortiGate-5140 chassis to AC power using the FortiGate-5053 power converter tray Power connection and configuration Attach the ESD wrist strap to your wrist and to an ESD socket or to a bare metal surface on the chassis or frame. Loosen the screws and remove the terminal block cover from the FortiGate-5140 PEM.

  • Page 25: Connecting The Fortigate-5140 Chassis To Data Center Ground

    Power connection and configuration Figure 16: Wiring the FortiGate-5053 power converter tray Connecting the FortiGate-5140 chassis to data center ground The FortiGate-5053 power converter tray does not have a ground connector. So, even if you are using a FortiGate-5053 power converter tray to supply DC power to your FortiGate-5140, you must use the procedure FortiGate-5140 chassis to data center ground”...
  • Page 26 Turning on FortiGate-5140 chassis power Power connection and configuration FortiGate-5140 Chassis Guide 01-30000-0396-20070201...

  • Page 27: Fortigate-5140 Hardware Procedures

    FortiGate-5140 hardware procedures FortiGate-5140 hardware procedures This chapter assumes the chassis has been mounted and connected to a power source as detailed in This chapter discusses: • Mounting the FortiGate-5140 chassis • Inserting 5000-series modules into a FortiGate-5140 chassis • Use FortiSwitch-5003 modules for base backplane communication Mounting the FortiGate-5140 chassis Note: Mount the FortiGate chassis before connecting power and installing the...

  • Page 28: Use Fortiswitch-5003 Modules For Base Backplane Communication

    Use FortiSwitch-5003 modules for base backplane communication Use FortiSwitch-5003 modules for base backplane communication Your FortiGate-5140 chassis may have been shipped with temporary slot filler panels that include a warning message to read the FortiGate-5000 documentation before installing your product. The temporary slot fillers must be removed and all slots filled;...

  • Page 29: For More Information

    Fortinet Tools and Documentation CD All Fortinet documentation is available from the Fortinet Tools and Documentation CD shipped with your Fortinet product. The documents on this CD are current for your product at shipping time. For the latest versions of all Fortinet documentation see the Fortinet Technical Documentation web site at http://docs.forticare.com.
  • Page 30 © Copyright 2007 Fortinet, Inc. All rights reserved. No part of this publication including text, examples, diagrams or illustrations may be reproduced, transmitted, or translated in any form or by any means, electronic, mechanical, manual, optical or otherwise, for any purpose, without prior written permission of Fortinet, Inc.

Table of Contents