Table of Contents
Advertisement
5.1.4
Configuration
Besides finding 3510/3520, eSearch can also configure the 3510/3520.
1.
Select a detected 3510/3520 by click on the lists first.
2.
Click on Setting button to open the setting dialog.
3.
Configure name, network, login and video attribute.
4.
After finishing configuration, push on Submit button to apply the new settings.
Rename
Change the name of 3510/3520's in the Name field.
Configure Network
This function configures the IP address of 3510/3520. There are three options: DHCP
/ Static IP.
DHCP: Obtain IP from DHCP server dynamically.
Static: If the DHCP server is absent, assign IP address manually.
Configure Login
If 3510/3520 authentication function is enabled, you have to key in username and
password to pass its proof.
1.
Check the Login
2.
Key in username and password
Note!
Only alphanumeric character is accepted.
Upper and lower case is different.
DHCP Figure
Static Figure
49
NYS-3510/NYS-3520 User Manual
Advertisement
Table of Contents
