Table of Contents
Advertisement
Setting Items:
iOSD combo box: Select a Modbus controlling setting. There are two options:
iOsd1 and iOsd2.
Enable check box: Check this box to enable this set of Modbus controlling. Use
Mouse to click on the video preview window for assigning the location of the
reading. The assigned location will be marked with a red cross.
Position X and Position Y: Report the coordinate of location which shows the
reading.
Set button: Click this button to accept the assigned location.
Protocol combo box: Select a Modbus protocol.
–
Options: Modbus_RTU-Master, Modbus_TCP-Server.
Memory Type: Current memory type is 4X only.
Address combo box: Address has four options 1, 2, 3 and 4.
K radio box: The K parameter in transfer formula of reading value.
–
Formula: Output_Value = (K x Input_Value) + Bias
Bias box: The Bias parameter in transfer formula of reading value.
Display Format: Assign the format of output value.
–
Total Digits combo box: Assign how many digits to display (not include
point).
–
Fractional Digits combo box: Assign how many digits after the decimal point
to display.
–
Font Color combo box: Select the color of output text. Options: White and
Black.
–
Tag Name box: Assign the tag of the output value. Only accept capital and
number.
Note!
The sum of total characters of Digits and Tag Name is 14.
NYS-3510/NYS-3520 User Manual
44
Advertisement
Table of Contents
