Table of Contents
Advertisement
Video Setting
Configure the attribute of video by push on Video... button to open the dialog.
Adjust the setting by pulling the bar.
5.1.5
Browsing
After eSearch had found the 3510/3520s, user can double click the mouse on the
any of them. The browser IE opens automatically to access its various functions. Or
select a 3510/3520 first then click the Browse button to explore 3510/3520's func-
tions by IE.
5.2
Restore to Factory Default
Restore to factory default steps (One SD Card is needed):
1.
Find the MAC address of the 3510/3520 on the device (Certification Label).
2.
Create a text file named fdef3520.cmd (NVS-3520) or fdef3510.cmd (NVS-
3510).
3.
Key in its MAC address in the text file. Example: 00:01:28:3D:7A:C6.
4.
Save the cmd file into SD disk.
5.
Remove the power of 3510/3520.
6.
Insert SD disk into 3510/3520.
7.
Power on 3510/3520.
8.
Wait for a couple of seconds, 3510/3520 will restore to factory default, and the
cmd file in the SD card will be deleted automatically.
Warning! All the configuration or settings will be erased.
The default IP address is fixed to 10.0.0.1. If you want to set it to DHCP, please refer
to the section Using eSearch.
NYS-3510/NYS-3520 User Manual
50
Advertisement
Table of Contents
