Ptz Configuration; Configure Ptz For Video - Advantech NVS-3510 User Manual

Ip video server

Table of Contents

4.8

PTZ Configuration

This webpage configures the serial port 2 for controlling PTZ camera.

4.8.1

Since 3520 has two video sources, it can control two PTZ cameras: the Video 1 and

Video 2. The two cameras share the same serial port. You can distinguish them by

assign different Device ID. For 3510, it only supports one PTZ camera.

Setting Items:

Enable PTZ check box: Check this box to enable PTZ control.

Protocol combo box: Select a PTZ controlling protocol - Pelco-D or Pelco-P

Device ID box: Assign a number as the ID of this PTZ camera.

Speed Control Items

Below are the four speed controls. Their options are: Slowest, Slow, Half, Fast,

Full and Turbo.

–

Pan speed combo box: Select the speed of pan.

NYS-3510/NYS-3520 User Manual

Table of Contents

Nvs-3520