DCS RDV2 Installation Instructions Manual page 5

Anti-tip bracket (1)
Unpacking and handling
Inspect the product to verify that there is no shipping damage. If any damage is detected,
●
call the shipper and initiate a damage claim. DCS by Fisher & Paykel is not responsible for
shipping damage.
DO NOT discard any packing material (box, pallet, straps) until the unit has been
●
inspected.
Remove the outer carton and any packing material from the shipping base.
●
IMPORTANT!
DO NOT lift range by the oven door handles!
●
DO NOT remove the grill or griddle assemblies!
●
3
PARTS SUPPLIED FOR INSTALLATION
#10 x 2" 5/16" x 1 1/2"
wood screws (4) sleeve anchors (2)
4
UNPACKING AND HANDLING THE RANGE
Lag bolts and
washers (2)
RGCV2 MODELS ONLY
IMPORTANT!
Before installing and using the range, be sure to remove any shipping spacers
●
from the oven, as shown below.
Shipping spacer
5