biochrom Novaspec III Plus Manual page 17

Press ok to save and exit the units
selection.
Step 7
If required, enter a sample name. This name
followed by an incrementing sample number will be
used for naming subsequent results.
Press the down arrow key.
Step 8
Set the sample option to yes, if you need to
measure many different samples and assign
different sample names. The prompt will, by
default, contain the sample name last entered.
Press the down arrow key.
Step 9
Press ok when all parameters have been
entered.
Step 10
Insert reference sample, press
Step 11
Insert sample, press
Repeat Step 11 for all samples.
.
.
17 | P a g e