Parameters; Absorbance - biochrom Novaspec III Plus Manual

Parameters

Absorbance

Step 1
Press the Options Key
Step 2
Press 1 to set parameters.
Step 3
If not already in Absorbance mode, use left or right
arrow keys to select Absorbance mode.
Press the down arrow key.
Step 4
Use the left and right arrow keys to change the
wavelength, or use the number keypad.
Press the down arrow key.
Step 5
If required, enter a sample name. This name
followed by an incrementing sample number will be
used for naming subsequent results.
Press the down arrow key.
Step 6
Set this option to yes, if you need to measure many
different samples and assign different sample
names. The prompt will, by default, contain the
sample name last entered.
Press the down arrow key.
Step 7
Press ok when all parameters have been
entered.
.
10 | P a g e