Rigol MSO1000Z Series User Manual page 98

RIGOL Chapter 5 To Trigger the Oscilloscope
Trigger Mode:
Press Sweep to open the trigger mode list and select auto, normal or single. For the
details, please refer to "Trigger Mode". The corresponding status light of the
current trigger mode turns on.
Trigger Setting:
Press Setting to set the trigger parameters (trigger holdoff and noise rejection)
under this trigger type.
5-24 MSO1000Z/DS1000Z User's Guide
GlobalTestSupply
www. .com
nd Quality Products Online at: sales@GlobalTestSupply.co