Rigol MSO1000Z Series User Manual page 32

RIGOL
Connect the logic probe:
1. Connect the single-wire terminal of the logic probe to the digital channel input
terminal at the front panel of the oscilloscope in the correct direction.
2. Connect the signal under test to the other terminal of the logic probe. MSO1000Z
series is provided with the RPL1116 logic probe (standard) which provides two
connecting methods to connect the signal under test to realize convenient and
flexible detection. For the details, please refer to the
Guide
.
Digital Channel Input Terminal
Note:
The digital channel input terminal does not support hot plug. Please do not
insert or pull out the logic probe when the instrument is powered on.
1-6
nd Quality Products Online at:
Figure 1-6 To Connect the Logic Probe
GlobalTestSupply
www.
Chapter 1 Quick Start
RPL1116 Logic Probe User's
MSO1000Z/DS1000Z User's Guide
.com
sales@GlobalTestSupply.co