Rigol MSO1000Z Series User Manual page 121

Chapter 6 MATH and Measurement
waveform corresponding to the horizontal center of the screen.
4. Horizontal Scale
Press Hz/Div and use
domain waveform.
5. Vertical Position
Press Offset and use
6. Vertical Scale
Press Scale and use
7. Select Window Function
Spectral leakage can be considerably decreased when a window function is used.
MSO1000Z/DS1000Z provides six kinds of FFT window functions (as shown in
the table on the next page) which have different characteristics and are
applicable to measure different waveforms. You need to select the window
function according to the waveform to be measured and its characteristics. Press
Window to select the desired window function and the default is "Rectangle".
MSO1000Z/DS1000Z User's Guide
nd Quality Products Online at:
to adjust the horizontal scale of the frequency
to adjust the vertical position of the operation results.
to adjust the vertical scale of the operation results.
GlobalTestSupply
www. .com
sales@GlobalTestSupply.co
RIGOL
6-7