Cisco TelePresence SX20 Quick Set Administrator's Manual page 58

Cisco TelePresence SX20 Quick Set

Introduction
Upgrade the system software
Sign in to the web interface and navigate to
Software Upgrade.
Download new software
For software download, go to the
Cisco Download Software web page:
►
http://www.cisco.com/cisco/software/navigator.html.
Then navigate to your product.
The format of the file name is "s52010ce8_2_x.pkg" or
"s52011cenc8_2_x.pkg" (non-crypto). Each software version
has a unique file name.
Install new software
Download the appropriate software package and store it
on your computer. This is a .pkg file.
1. Click Browse... and find the .pkg file that contains the
new software.
The software version will be detected and shown.
2. Click Install software to start the installation process.
The complete installation normally take no longer than
15 minutes. You can follow the progress on the web
page. The video system restarts automatically after the
installation.
You must sign in anew in order to continue working with
the web interface after the restart.
D15329.03 SX20 Administrator Guide CE8.2, JUNE 2016.
Configuration Peripherals
(page 2 of 2)
Maintenance >
Software release notes
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (CE8).
► http://www.cisco.com/c/en/us/support/
Go to:
collaboration-endpoints/telepresence-quick-set-series/tsd-
products-support-series-home.html
Maintenance Maintenance
Check software version
The software version shows here
when you have selected a file.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
58
Administrator Guide
System settings Appendices
About software versions
This video conference system is using CE
software. The version described in this
document is CE8.2.x.