Labels For Devices - HP FlexFabric 12900E series Installation Manual

Figure 73 Generic label
(1) Dividing line on the label

Labels for devices

A device label is used to identify the device name, model, address, installation date, and so on.
Filling in labels
You can print or write desired contents on labels. Hewlett Packard Enterprise recommends that you
print labels.
To print labels, select a label printer and a label template as needed. For more information about
using a label printer, see the user guide of the printer.
To write labels, use black markers. A marker has two nibs. Be sure to use the smaller nib to write
labels.
Affixing labels
After printing or writing a label, remove the label from the bottom page and affix it to the network
cable, or the identification plate of the power cord.
Affixing a label to a network cable
Typically, a label is affixed 2 cm (0.79 in) away from the connector on a network cable. You can affix
the label to other positions as needed.
vertically.
(2) Cut dotted line
Figure 74 shows how to affix a label when a cable is laid
119