Configuring The Switch - HP FlexFabric 12900E series Installation Manual

*
*
****************************************************************************
Compiled Date
CPU Type
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
BASIC CPLD Version
EXTENDED CPLD Version : 4.0
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/12900-CMW710-SYSTEM-R1135.bin......................
............................................................................
....................................Done.
Loading file flash:/12900-CMW710-DEVKIT-R1135.bin....Done.
Loading file flash:/12900-CMW710-MANUFACTURE-R1135.bin...Done.
Loading file flash:/12900-CMW710-BOOT-R1135.bin........................
............................................................................
.......................Done.
Image file flash:/12900-CMW710-BOOT-R1135.bin is self-decompressing....
............................................................................
.....Done.
System image is starting...
Line aux0 is available.
Press ENTER to get started.
Press Enter at the prompt. When the prompt
After powering on the switch, check the following items:
•
The cooling system is working, and you can hear fan rotating noise and feel air being blown out.
•
The system status LEDs on the MPUs show that the system is operating normally. For more
information about LED behaviors, see

Configuring the switch

By default, the switch does not authenticate the console login user at an AUX interface. To increase
system security and enable remote management:
•
Configure remote access services, for example, Telnet or SSH.
•
Configure authentication on each user interface, including the AUX interfaces.
BootWare, Version 1.32
: Mar 18 2015
: XLP316
: 1200MHz
: DDR3 SDRAM
: 4096MB
: 667MHz
: 1536KB
: 1012MB
: 4.0
: Ver.B
<Sysname>
"Appendix C
58
appears, you can configure the switch.
LEDs."
*
*