Figure 31 Removing a filler panel (12916E switch)
Figure 32 Installing a power supply (12916E switch)
Connecting the power cord
CAUTION:
• Power on the switch after you have installed two fan trays on the switch.
• Make sure each power cord has a separate circuit breaker.
• Turn off the circuit breaker before you connect the power cord.
Connecting the AC power cord
To connect the power cord:
Plug the AC power cord connector into the AC input receptacle of the power supply.
1.
Use a removable cable tie or self-adhesive cable tie to secure the power cord to the handle of
2.
the power supply.
Plug the other end of the power cord into an AC power receptacle, and turn on the circuit
3.
breaker.
42