Switching Fabric Module Status Leds On A Fan Tray - HP FlexFabric 12900E series Installation Manual

Switching fabric module status LEDs on a fan tray

A fan tray provides a RUN and ALM LED pair for each switching fabric module it covers.
•
On the 12916E and 12908E fan trays, the switching fabric module LED pairs correspond to the
switching fabric module the fan tray covers from left to right.
•
On the 12904E fan tray, the extend lines of the switching fabric module LED pairs correspond to
the switching fabric module the fan tray covers from left to right.
Figure 60 Corresponding relations between the LEDs on the 12904E fan trays and
switching fabric module slots
(1) LEDs for the switching fabric module slot 6
(3) Switching fabric module slot number
(5) LEDs for the switching fabric module slot 11
Table 64 Description for switching fabric module status LEDs on a fan tray
RUN
Flashing (once per
second)
Off
Flashing (once per
second)
Off
On
ALM Description
Off The switching fabric module is operating correctly.
On The switching fabric module has failed.
•
The switching fabric module is loading software.
On •
The switching fabric module is operating incorrectly. For
example, the temperature exceeds the acceptable range.
Off The switching fabric module has not started or is not powered on.
On The switching fabric module is booting.
(2) LEDs for the switching fabric module slot 8
(4) LEDs for the switching fabric module slot 9
(6) Switching fabric module slot number
107