Figure 76 Affixing a label
TO:
B03 -48V2
Bind cable ties on both ends of a cable. After the bundling, the finished identification plate must be on
top of the cable in horizontal cabling, or on the right side of the cable in vertical cabling. Make sure
the label is facing out, as shown in
Figure
77.
Figure 77 Affixed labels
Affixing a generic label
The requirements for affixing a generic label are the same as affixing a label on a network cable. For
more information, see
"Affixing a label to a network
cable." For the example of affixed labels,
see
Figure
78.
121