Sfp+ Port Led; Qsfp+ Port Led; Management Ethernet Port Leds - HP HPE FlexFabric 5930 Installation Manual

Table 23 System status LED description
LED mark
SYS

SFP+ port LED

Each SFP+ port has a status LED to show port operating status and activities.
Table 24 SFP+ port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off

QSFP+ port LED

Each QSFP+ port has a status LED to show port operating status and activities.
Table 25 QSFP+ port LED description
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off

Management Ethernet port LEDs

The HPE 5930-32 QSFP+/HPE 5930-32 QSFP+ TAA/HPE 5930-4Slot/HPE 5930-4Slot TAA
switches provide a LINK LED and an ACT LED for the management Ethernet port.
Status Description
Steady green The switch is operating correctly.
Flashing green The switch is performing power-on self test (POST).
Steady red The system has failed to pass POST or has problems such as fan failure.
Flashing red Some ports have failed to pass POST.
Off The switch is powered off or has failed to start up.
Description
A transceiver module or cable has been correctly installed. The port has a link and is
operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and is
operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Description
A transceiver module or cable has been correctly installed. The port has a link
and is operating at 40 Gbps.
The port is sending or receiving data at 40 Gbps.
A transceiver module or cable has been correctly installed. The port has a link
and is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
No transceiver module or cable has been installed or no link is present on the
port.
60