Leds; System Status Led; Management Ethernet Port Leds; 10/100/1000Base-T Autosensing Ethernet Port Led - HP HPE FlexFabric 5901 Series Installation Manual

LEDs

System status LED

The system status LED shows the operating state of the switch.
Table 21 System status LED description
LED mark
SYS

Management Ethernet port LEDs

The switch provides one LINK LED and one ACT LED for each management Ethernet port.
Table 22 Management Ethernet port LEDs description
LED mark
LINK
ACT

10/100/1000BASE-T autosensing Ethernet port LED

Table 23 10/100/1000BASE-T autosensing Ethernet port LED description
10/100/1000BASE-T
autosensing Ethernet
port LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
Status
Steady green
Flashing green (1 Hz)
Steady red
Flashing yellow (1 Hz)
Off
Status Description
Off The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Off The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
Description
A link is present on the port and the port is operating at 1000 Mbps.
The port is sending or receiving data at 1000 Mbps
A link is present on the port and the port is operating at 10/100 Mbps.
The port is sending or receiving data at 10/100 Mbps
No link is present on the port.
Description
The switch is operating correctly.
The switch is performing power-on self test (POST).
The switch has failed the POST or is faulty.
Some ports have failed to pass POST or are faulty.
The switch is powered off.
47