Removing The Server From The Rack; How To Remove The Server From The Rack - Sun Oracle Sun X2-8 Installation Manual

Removing the Server from the Rack

This section provides instructions for removing your server from a the rack.
"How to Remove the Server from the Rack" on page 91
■
"How to Remove the Rackmounting Hardware from the Rack" on page 94
■
▼

How to Remove the Server from the Rack

This procedure assumes that you have turned off the server, and removed any cables or cords
that would restrict the movement of the server.
Before You Begin
Caution –
components. To reduce the risk of serious personal injury or equipment damage, use a
mechanical lift to remove the sever from the rack. If a mechanical lift is not available, remove
components to reduce weight and use two persons to lift it.
Disconnect all cables from the rear of the system.
1
If a lift is not available, remove components to reduce the system's weight. See
2
Components to Reduce Weight"on page
The Sun Server X2-8 weighs about 180 pounds (100 kg) when fully loaded with
51.
"How to Remove
91