Installing The Server Into A Rack - Sun Oracle X3-2 Installation Manual

Installing the Server Into a Rack

This section describes how to install the server into a rack using the rail assembly in
the rackmount kit. Perform these procedures if you purchased the rail assembly.
Description
Complete all installation
prerequisite tasks.
Check that your rack meets the
requirements for installation of this
server.
Review safety precautions.
Verify that you have received all
components of the rackmount kit.
Stabilize the rack.
Install mounting brackets onto the
server.
Mark the rackmount location.
Attach the tool-less slide-rail
assembly to the rack.
Install the server into the slide-rail
assembly.
(Optional) Install the cable
management arm for routing server
cables.
Related Information
"About the Installation Procedure" on page 1
■
"Preparing for Server Installation" on page 17
■
Links
"Installation Prerequisites" on page 22
"Rack Requirements" on page 22
"Safety Precautions When Rackmounting the
Server" on page 23
"Rackmount Kit Contents" on page 24
"Stabilize the Rack for Installation" on page 25
"Install Mounting Brackets" on page 26
"Mark the Rackmount Location" on page 28
"Attach Tool-less Slide-Rail Assemblies" on page 29
"Install the Server Into the Slide-Rail Assemblies"
on page 32
• "Install the Second-Generation Cable
Management Arm" on page 35
• "Remove the Second-Generation Cable
Management Arm" on page 46
• "Install the First-Generation Cable Management
Arm" on page 50
21